Preventative Maintenance Tips

It’s that time of year again in the South when the climate cannot make up its mind. One day we’ll be in a heat advisory, and the next it could be a cool, fall day. With the season changes, it may also be hard to check on your appliances and program your HVAC system.

When it comes to your heating and cooling system, there are some guidelines to assist you ease into the fall and winter seasons. First, by placing a programmable thermostat in your home, you can reduce the energy bills and raise the comfort level year round. A programmable thermostat will allow you to alter the temperature based on the time of day, according to your needs.

Another efficient method to save cash and maintain your heating and cooling system to operate effectively year round is with regular checkups on the appliances. Through servicing your HVAC on a regular basis, your local specialist can repair any minor problems with the system before they become larger, costly issues. At Progressive Heating and Air, we recommend having your system serviced at the end of each season.

 

Preventative Maintenance Tips for your HVAC System

Taking care of your home’s HVAC system does not have to be hard or expensive. Follow these preventive maintenance tips to help improve comfort and reduce energy costs:

  • Always keep the furnace filter clean. A filter that is clogged creates the heating system to perform harder, reducing its lifespan. Replacing the filter once a month in the winter is highly recommended.

  • Keep the exterior condenser clean. Ensure that no snow, leaves, shrubs or other debris is cleared away at all times.

  • If your furnace is vented at the side of the house, make sure to keep ice from storing in the vent and shovel the areas surrounding the vent.

 

A call to your local expert can keep your appliances operating efficiently for years to come. A professional will be able to inspect any possible issues and have the ability to solve them before they get worse. For more information, contact Progressive Heating and Air today at 770-253-2665, or schedule online!


Meet Management at PHAC!


Save $$

As the weather turns chilly, improve your home’s comfort, and save energy and money all while doing a good thing for the environment. By using energy efficiently at home, you not only lower your energy bills, but prevent air pollution too. Here are ways to save, offered by the ENERGY STAR program at the U.S. Environmental Protection Agency.

1. Know the Facts – The average family spends $1,500 a year on energy bills, with nearly half of that spent on heating and cooling. Energy-efficient heating and cooling equipment, installed alongside a well-sealed duct system, can save as much as 20 percent on annual energy costs.
2. Keep it Clean – A dirty air filter can increase your energy costs and lead to early equipment failure. Clean or change the air filter in your heating and cooling system regularly. Also, have your equipment checked seasonally to make sure it’s operating efficiently and safely – check-ups can identify problems early. Dirt and neglect are the #1 causes of system failure.
3. Bundle Up – Hidden gaps and cracks in a home can add up to as much airflow as an open window. When heat escapes, your system must work harder and you use more energy. Home Sealing can improve your home “envelope” – the outer walls, ceiling, windows and floors — and
can save up to 10 percent in energy costs. Start by sealing air leaks and adding insulation, while paying special attention to your attic and basement, where the biggest gaps and cracks are often found. If replacing windows, choose ENERGY STAR qualified ones.
4. Tighten Your Ducts – If you have a forced air furnace or heat pump, then a duct system is responsible for circulating warm air throughout your home. Leaky ducts can reduce your system’s overall efficiency by 20 percent, causing your equipment to work harder than necessary to keep you comfortable. Ask your HVAC contractor about improving your ducts.
5. Don’t Oversize – When replacing old equipment, make sure your new equipment is properly sized for your home. An oversized system will cost more to buy and operate and will cycle on and off too frequently, reducing your comfort and leading to early system failures and repair costs. Correct sizing will ensure that your equipment works efficiently. Make sure your HVAC contractor uses Manual J or an equivalent sizing tool to determine what’s right for your home.
6. Consult a Professional – Find an experienced, licensed contractor before embarking on any heating and cooling overhaul. Visit http://www.natex.orq to find a contractor whose technicians are certified by NATE (North American Technician Excellence), the leading industry-supported testing and certification program.
7. Shop Smart – If your heating equipment has not been regularly maintained and is 15 years or older, it’s probably time for a more efficient replacement. Ask for an ENERGY STAR when buying the following equipment:

  • Furnaces – Old furnaces cost more to operate per year than new, ENERGY STAR qualified models that are 15 percent more efficient than standard models.
  • Boilers – An ENERGY STAR qualified boiler uses features like electric ignition and new combustion technologies that extract more heat from the same amount of fuel, to be seven percent more energy-efficient.
  • Heat Pumps – When installed in a home with a well-sealed envelope, heat pumps provide great value and comfort for your energy dollar. An ENERGY STAR qualified geothermal heat pump is 30 percent more efficient than comparable new equipment and can save you as much as $400 annually. A qualified electric heat pump is 20 percent more efficient.
  • Programmable Thermostats – Regulate your home’s temperature with four programmable settings and you can save about $100 annually on your energy bills.

sme

Source: ENERGY STAR


Preventative Maintenance Is Important!

 

Preventative maintenance for your air conditioner is important. Inspecting the system to check for problems before they grow into major air conditioner malfunctions can save hundreds of dollars and periodic preventative maintenance for your air conditioner is a great way to accomplish that. Semi-annual preventative maintenance, or annual preventative maintenance, for your air conditioner by Progressive Heating & Air can go a long way in ensuring the effective operation of your air conditioner.
Progressive Heating & Air’s Preventative Maintenance Program will keep your air conditioner running at its peak performance and efficiency.

Spring-HVAC-Preventive-Maintenance

Inadequate preventative maintenance for your air conditioner is one of the chief causes of air conditioner malfunctions, poor performance and inefficiency. Like an automobile needs inexpensive periodic preventative maintenance to keep it running and to avoid costly repairs, your air conditioner requires periodic preventative maintenance. Neglecting preventative maintenance for your air conditioner may lead to a steady decline in the air conditioner’s performance as well as increased energy consumption and costs.  It is also important to point out that maintenance is required to keep your equipments warranties in good standing.

For more information about our service and what it covers, go here.

Give us a call, or schedule an appointment for maintenance here.


Fall Tips

Have your Heating system tuned-up for the season, so that you are running at peak efficiency. Operating at peak efficiency will save money because the system doesn’t have to work as hard to do its job.

Replace your furnace or air handler filters on a regular basis. Lack of regular filter changes and maintenance is the number one cause of system breakdowns and costly repair bills.

Keep the thermostat constant. Continuously adjusting the thermostat can be very inefficient. You can, however, lower the thermostat 2-3 degrees during the day while you’re away to save money. For every degree you lower the setting, you can expect to cut energy consumption by up to 3-5%.

Flip the fan switch on your thermostat into the “fan on” mode when heating the house. This process will ensure that air is always being stirred to prevent hot and cold pockets from forming.

Consider a Heat Pump if you are going to replace your outdoor unit. Although a Heat Pump cannot produce air as hot as your gas furnace, when you combine a Heat Pump with your gas furnace you have a system that is much more efficient and still able to deliver the warmth we all love.

Set air vents on the second floor to receive approximately 45 percent of the heated air. This will help even out the temperatures from the first to the second floor of the home. (Remember, hot air rises)

Open the shades and curtains to help produce radiant heat of the sun.

Replace older windows with more efficient low-E glass. These windows help to reduce the heat loss of your homes HVAC system. Also, keep storm windows closed. This saves money and extends the life of the system.

Run humidifiers to help maintain the warm feeling in your home. Proper humidity can make the air feel up to 3 degrees warmer. Which means you can turn down your thermostat a couple of degrees and save money on your utility bills and still feel the warmth that we all love on those cold days in winter. (Depending upon your environment, you may still need a dehumidifier running in the basement)

Clear or cut back shrubs and bushes from the outdoor Heat Pump unit. The sides of the unit require at least 12-18 inches of clearance for proper performance.

Keep fallen leaves, grass clippings, foliage and other dirt and debris away from your outdoor Heat Pump unit. And keep the indoor coils clean, following manufacturers’ instructions.

Don’t block vents or ducts inside the house to assure air flow in the home.

Caulk and install weather stripping
around windows and doors (especially the attic) to close air gaps.

Consider use of a programmable thermostat to automatically increase or decrease temperatures during day and night to suit a family’s lifestyle and reduce energy cost.

Keep windows and doors closed to help with the homes natural heat loss.

Progressive Heating & Air Conditioning can help you with any heating and air problem as well as diagnose your whole house and recommend solutions that will provide you and your family with the most energy efficient home possible.

Questions? Concerns? Feedback?

Also, visit us on our website.


Planned Maintenance for your Business

Progressive Heating and Air offers Preventive Maintenance Service Agreements for all brands of rooftops units, compressors, air-handlers, cooling towers, heat pumps, variable speed drives, controls and accessories.

Each agreement is tailored to meet the budget and operating needs of your facility and can include both preventive maintenance to keep your equipment running in peak condition and predictive maintenance services to identify potential problems before costly breakdowns occur.

It will help you:

  • Maintain the efficiency and reliability of all equipment
  • Minimize downtime, repair bills, and loss of use
  • Ensure continuous care with our after hours call center staffed with trusted employees

Our planned maintenance options include:

  • Inspection and reports
  • Inspection with seasonal adjustments and preventive maintenance
  • Full maintenance, including preventive maintenance plus service calls
  • Predictive maintenance, including eddy current test, combustion analysis, and vibration analysis
  • 24/7 monitoring
  • Maintenance of cooling towers, compressors, air handlers, rooftop units, air-side distribution equipment, and controls.

Looking for an HVAC Company?

Most of us don’t think about our HVAC equipment until it doesn’t work. Isn’t that the way it goes? Well, your heating and air conditioning system is one of the most important pieces of equipment you have in your home. When it doesn’t work, it’s not just you that is inconvenienced, it is your entire family.

Trust is such an important factor in our trade. We know that. Regardless of where you live – find a NATE [North American Technician Excellence] Certified technician. These guys have gone through some serious testing in a bunch of different areas – including heat pumps, gas furnaces, air distribution, energy efficiency, etc. You can go to this website and type in your zip code to find a company that hires these technicians in your area.

A little bit about us at Progressive Heating and Air:

We pride ourselves on providing our customers with professional installations and reliable service. We are a team of expert technicians and sales engineers trained in all aspects of sales, service, installation, renovation and replacement of commercial and residential HVAC applications. Progressive Heating & Air Conditioning can help you with any heating and air problem as well as diagnose your whole house and recommend solutions that will provide you and your family with the most energy efficient home possible. Progressive Heating & Air Conditioning offers much more than just heating and air! Customer service: that’s what it is all about. Making sure every call gets answered in a timely manner and that every job gets done in a prompt and professional manner by qualified people. Sounds simple doesn’t it? That’s because it is, if you just hang on to that original thought and don’t forget where it is you came from or who it is that got you there.

Oh – and by the way, we are a NATE certified company, and very proud of that!

Give us a call to schedule your appointment or get some advice at 770-253-2665. If you would rather schedule an appointment at your convenience, you can do that on our website.

We are proud to have serviced the Coweta and Fayette county since 1994!